Revision: 4975 Author: russblau Date: 2008-02-04 18:48:20 +0000 (Mon, 04 Feb 2008)

Log Message: ----------- Copy config.py for use in rewrite.

Added Paths: ----------- branches/rewrite/pywikibot/config.py

Copied: branches/rewrite/pywikibot/config.py (from rev 4974, trunk/pywikipedia/config.py) =================================================================== --- branches/rewrite/pywikibot/config.py (rev 0) +++ branches/rewrite/pywikibot/config.py 2008-02-04 18:48:20 UTC (rev 4975) @@ -0,0 +1,521 @@ +# -*- coding: utf-8 -*- +# +# (C) Rob W.W. Hooft, 2003 +# +# Distributed under the terms of the MIT license. +# +__version__ = '$Id$' + +import os, re +import sys as __sys +# IMPORTANT: +# Do not change any of the variables in this file. Instead, make +# a file user-config.py, and overwrite values in there. + +# Note: all variables defined in this module are made available to bots as +# configuration settings, *except* variable names beginning with an +# underscore (example: _variable). Be sure to use an underscore on any +# variables that are intended only for internal use and not to be exported +# to other modules. + +############## ACCOUNT SETTINGS ############## + +# The family of sites we are working on. wikipedia.py will import +# families/xxx_family.py so if you want to change this variable, +# you need to write such a file. +family = 'wikipedia' +# The language code of the site we're working on. +mylang = 'language' + +# The dictionary usernames should contain a username for each site where you +# have a bot account. Please set your usernames by adding such lines to your +# user-config.py: +# +# usernames['wikipedia']['de'] = 'myGermanUsername' +# usernames['wiktionary']['en'] = 'myEnglishUsername' +# +# If you have a sysop account on some wikis, this will be used to delete pages +# or to edit locked pages if you add such lines to your +# user-config.py: +# +# sysopnames['wikipedia']['de'] = 'myGermanUsername' +# sysopnames['wiktionary']['en'] = 'myEnglishUsername' +usernames = {} +sysopnames = {} +disambiguation_comment = {} +gdab_namespaces = {} + +# Solve captchas in the webbrowser. Setting this to False will result in the +# exception CaptchaError be thrown if a captcha is encountered. +solve_captcha = True + +# Some sites will require password identication to access the HTML pages at +# the site. If you have any such site, add lines to your user-config.py of +# the following form: +# +# authenticate['en.wikipedia.org'] = ('John','XXXXX') +# +# where John is your login name, and XXXXX your password. +# Note: +# 1. This is only for sites that use authentication in the form that gives +# you a popup for name and password when you try to access any data, NOT +# for, for example, wiki usernames +# 2. You must use the hostname of the site, not its family/language pair +authenticate = {} + +# password_file = ".passwd" +# A password file with default passwords. For more information, please +# see LoginManager.readPassword in login.py. +# By default you are asked for a password on the terminal. +password_file = None + +# Get the names of all known families, and initialize +# with empty dictionaries +import wikipediatools as _wt +_base_dir = _wt.get_base_dir() +_RfamilyFile = re.compile('(?P<name>.+)_family.py$') +for _filename in os.listdir(os.path.join(_base_dir, 'families')): + _m = _RfamilyFile.match(_filename) + if _m: + familyName = _m.group('name') + usernames[familyName] = {} + sysopnames[familyName] = {} + disambiguation_comment[familyName] = {} + +# Set to True to override the {{bots}} exclusion protocol (at your own risk!) +ignore_bot_templates = False + +############## USER INTERFACE SETTINGS ############## + +# The encoding that's used in the user's console, i.e. how strings are encoded +# when they are read by raw_input(). On Windows systems' DOS box, this should +# be 'cp850' ('cp437' for older versions). Linux users might try 'iso-8859-1' +# or 'utf-8'. +# This default code should work fine, so you don't have to think about it. +# TODO: consider getting rid of this config variable. +try: + console_encoding = __sys.stdout.encoding +except: + #When using pywikipedia inside a daemonized twisted application, + #we get "StdioOnnaStick instance has no attribute 'encoding'" + console_encoding = None + +# The encoding in which textfiles are stored, which contain lists of page titles. +textfile_encoding = 'utf-8' + +# tkinter isn't yet ready +userinterface = 'terminal' + +# Should we transliterate characters that do not exist in the console +# character set? +# True: whenever possible +# False: never - always replace them by question marks +# Currently only works if interface 'terminal' is set. +transliterate = True + +# Should the system bell be ringed if the bot expects user input? +ring_bell = False + +# Colorization can be used to markup important text parts of the output. +# On Linux/Unix terminals, ANSI escape codes are used for this. On Windows, +# it is done by a DLL call via ctypes. ctypes is only available since +# Python 2.5, so if you're using Python 2.4 or lower on Windows, you should +# upgrade. +# Set this to False if you're using Linux and your tty doesn't support +# ANSI colors. +try: + # Don't print colorized when the output is, for example, piped to a file. + colorized_output = __sys.stdout.isatty() +except: + colorized_output = False + +############## EXTERNAL EDITOR SETTINGS ############## +# The command for the editor you want to use. If set to None, a simple Tkinter +# editor will be used. +# On Windows systems, this script tries to determine the default text editor. +if __sys.platform=='win32': + try: + import _winreg + _key1 = _winreg.OpenKey(_winreg.HKEY_CURRENT_USER, 'Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts.txt\OpenWithProgids') + _progID = _winreg.EnumValue(_key1, 1)[0] + _key2 = _winreg.OpenKey(_winreg.HKEY_CLASSES_ROOT, '%s\shell\open\command' % _progID) + _cmd = _winreg.QueryValueEx(_key2, None)[0] + editor = _cmd.replace('%1', '') + # Notepad is even worse than our Tkinter editor. Nobody has + # deserved to use it. + if editor.lower().endswith('notepad.exe'): + editor = None + except: + #raise + editor = None +else: + editor = None + +# Warning: DO NOT use an editor which doesn't support Unicode to edit pages! +# You will BREAK non-ASCII symbols! +editor_encoding = 'utf-8' + +# The temporary file name extension can be set in order to use syntax +# highlighting in your text editor. +editor_filename_extension = 'wiki' + +############## LOGFILE SETTINGS ############## + +# Defines for which scripts a logfile should be enabled. Logfiles will be +# saved in the 'logs' subdirectory. +# Example: +# log = ['interwiki', 'weblinkchecker', 'table2wiki'] +# It is also possible to enable logging for all scripts, using this line: +# log = ['*'] +# To disable all logging, use this: +# log = [] +# Per default, logging of interwiki.py is enabled because its logfiles can +# be used to generate so-called warnfiles. +# This setting can be overridden by the -log or -nolog command-line arguments. +log = ['interwiki'] + +############## INTERWIKI SETTINGS ############## + +# Should interwiki.py report warnings for missing links between foreign +# languages? +interwiki_backlink = True + +# Should interwiki.py display every new link it discovers? +interwiki_shownew = True + +# Should interwiki.py output a graph PNG file on conflicts? +# You need pydot for this: http://dkbza.org/pydot.html +interwiki_graph = False + +# Specifies that the robot should process that amount of subjects at a time, +# only starting to load new pages in the original language when the total +# falls below that number. Default is to process (at least) 100 subjects at +# once. +interwiki_min_subjects = 100 + +# If interwiki graphs are enabled, which format(s) should be used? +# Supported formats include png, jpg, ps, and svg. See: +# http://www.graphviz.org/doc/info/output.html +# If you want to also dump the dot files, you can use this in your +# user-config.py: +# interwiki_graph_formats = ['dot', 'png'] +# If you need a PNG image with an HTML image map, use this: +# interwiki_graph_formats = ['png', 'cmap'] +# If you only need SVG images, use: +# interwiki_graph_formats = ['svg'] +interwiki_graph_formats = ['png'] + +# You can post the contents of your autonomous_problems.dat to the wiki, +# e.g. to http://de.wikipedia.org/wiki/Wikipedia:Interwiki-Konflikte . +# This allows others to assist you in resolving interwiki problems. +# To help these people, you can upload the interwiki graphs to your +# webspace somewhere. Set the base URL here, e.g.: +# 'http://www.example.org/~yourname/interwiki-graphs/' +interwiki_graph_url = None + +# Save file with local articles without interwikis. +without_interwiki = False + +############## SOLVE_DISAMBIGUATION SETTINGS ############ +# +# Set disambiguation_comment[FAMILY][LANG] to a non-empty string to override +# the default edit comment for the solve_disambiguation bot. +# Use %s to represent the name of the disambiguation page being treated. +# Example: +# +# disambiguation_comment['wikipedia']['en'] = \ +# "Robot-assisted disambiguation ([[WP:DPL|you can help!]]): %s" + +sort_ignore_case = False + +############## IMAGE RELATED SETTINGS ############## +# If you set this to True, images will be uploaded to Wikimedia +# Commons by default. +upload_to_commons = False + +############## SETTINGS TO AVOID SERVER OVERLOAD ############## + +# Slow down the robot such that it never requests a second page within +# 'minthrottle' seconds. This can be lengthened if the server is slow, +# but never more than 'maxthrottle' seconds. However - if you are running +# more than one bot in parallel the times are lengthened. +minthrottle = 1 +maxthrottle = 10 + +# Slow down the robot such that it never makes a second change within +# 'put_throttle' seconds. +put_throttle = 10 +# Sometimes you want to know when a delay is inserted. If a delay is larger +# than 'noisysleep' seconds, it is logged on the screen. +noisysleep = 3.0 + +# Defer bot edits during periods of database server lag. For details, see +# http://www.mediawiki.org/wiki/Maxlag_parameter +# You can set this variable to a number of seconds, or to None to disable +# this behavior. +# It is recommended that you do not change this parameter unless you know +# what you are doing and have a good reason for it! +maxlag = 5 + +# Maximum of pages which can be retrieved by special pages. Increase this if +# you heavily use redirect.py with action "double", and especially if you're +# running solve_disambiguation.py with the -primary argument. +special_page_limit = 500 + +############## TABLE CONVERSION BOT SETTINGS ############## + +# will split long paragraphs for better reading the source. +# only table2wiki.py use it by now +splitLongParagraphs = False +# sometimes HTML-tables are indented for better reading. +# That can do very ugly results. +deIndentTables = True +# table2wiki.py works quite stable, so you might switch to True +table2wikiAskOnlyWarnings = True +table2wikiSkipWarnings = False + +############## WEBLINK CHECKER SETTINGS ############## + +# How many external links should weblinkchecker.py check at the same time? +# If you have a fast connection, you might want to increase this number so +# that slow servers won't slow you down. +max_external_links = 50 + +report_dead_links_on_talk = False + +############## DATABASE SETTINGS ############## +db_hostname = 'localhost' +db_username = 'wikiuser' +db_password = '' + +############## SEARCH ENGINE SETTINGS ############## + +# Some scripts allow querying Google via the Google Web API. To use this feature, +# you must install the pyGoogle module from http://pygoogle.sf.net/ and have a +# Google Web API license key. Note that Google doesn't give out license keys +# anymore. +google_key = '' + +# Some scripts allow using the Yahoo! Search Web Services. To use this feature, +# you must install the pYsearch module from http://pysearch.sourceforge.net/ +# and get a Yahoo AppID from http://developer.yahoo.com +yahoo_appid = '' + +# To use Windows Live Search web service you must get an AppID from +# http://search.msn.com/developer +msn_appid = '' + +############## COPYRIGHT SETTINGS ############## + +# Enable/disable search engine in copyright.py script +copyright_google = True +copyright_yahoo = True +copyright_msn = False + +# Perform a deep check, loading URLs to search if 'Wikipedia' is present. +# This may be useful to improve number of correct results. If you haven't +# a fast connection, you might want to keep they disabled. +copyright_check_in_source_google = False +copyright_check_in_source_yahoo = False +copyright_check_in_source_msn = False + +# Web pages may content a Wikipedia text without 'Wikipedia' word but with +# typical '[edit]' tag result of copy & paste procedure. You can want no +# report for this kind of URLs, even if they are copyright violation. +# However, when enabled these URLs are logged in a file. + +copyright_check_in_source_section_names = False + +# Limit number of queries for page. +copyright_max_query_for_page = 25 + +# Skip a specified number of queries +copyright_skip_query = 0 + +# Number of attempts on connection error. +copyright_connection_tries = 10 + +# Behavior if an exceeded error occur. +# +# Possibilities: +# +# 0 = None +# 1 = Disable search engine +# 2 = Sleep (default) +# 3 = Stop + +copyright_exceeded_in_queries = 2 +copyright_exceeded_in_queries_sleep_hours = 6 + +# Append last modified date of URL to script result +copyright_show_date = True + +# Append length of URL to script result +copyright_show_length = True + +# By default the script try to identify and skip text that contents a wide +# comma separated list or only numbers. But sometimes that might be the +# only part unmodified of a slightly edited and not otherwise reported +# copyright violation. You can disable this feature to try to increase +# number of results. + +copyright_economize_query = True + +############## HTTP SETTINGS ############## +# Use a persistent http connection. An http connection has to be established +# only once per site object, making stuff a whole lot faster. Do NOT EVER +# use this if you share Site objects across threads without proper locking. +## DISABLED FUNCTION. Setting this variable will not have any effect. +persistent_http = False + +# Default socket timeout. Set to None to disable timeouts. +socket_timeout = 120 # set a pretty long timeout just in case... + + +############## FURTHER SETTINGS ############## + +# The bot can make some additional changes to each page it edits, e.g. fix +# whitespace or positioning of interwiki and category links. + +# This is an experimental feature; handle with care and consider re-checking +# each bot edit if enabling this! +cosmetic_changes = False + +# If cosmetic changes are switched on, and you also have several accounts at +# projects where you're not familiar with the local conventions, you probably +# only want the bot to do cosmetic changes on your "home" wiki which you +# specified in config.mylang and config.family. +# If you want the bot to also do cosmetic changes when editing a page on a +# foreign wiki, set cosmetic_changes_mylang_only to False, but be careful! +cosmetic_changes_mylang_only = True + +# End of configuration section +# ============================ +# System-level and User-level changes. +# Store current variables and their types. +_glv={} +_glv.update(globals()) +_gl=_glv.keys() +_tp={} +for _key in _gl: + if _key[0]!='_': + _tp[_key]=type(globals()[_key]) + +# Get the user files +_thislevel=0 +_fns=[os.path.join(_base_dir, "user-config.py")] +for _filename in _fns: + _thislevel += 1 + if os.path.exists(_filename): + _filestatus=os.stat(_filename) + _filemode=_filestatus[0] + _fileuid=_filestatus[4] + if (__sys.platform=='win32' or _fileuid==os.getuid() or _fileuid==0): + if __sys.platform=='win32' or _filemode&002==0: + execfile(_filename) + else: + print "WARNING: Skipped '%s': writeable by others."%_filename + else: + print "WARNING: Skipped '%s': owned by someone else."%_filename + +# Test for obsoleted and/or unknown variables. +for _key in globals().keys(): + if _key[0]=='_': + pass + elif _key in _gl: + nt=type(globals()[_key]) + ot=_tp[_key] + if nt==ot or nt==type(None) or ot==type(None): + pass + elif nt==type(1) and ot==type(1.0): + pass + elif ot==type(1) and nt==type(1.0): + pass + elif nt==type(1) and ot==type(True): + pass + elif ot==type(1) and nt==type(True): + pass + else: + print "WARNING: Type of '%s' changed"%_key + print " Was: ",ot + print " Now: ",nt + del nt,ot + else: + print "WARNING: Configuration variable %r is defined but unknown. Misspelled?" %_key + +# Fix up default console_encoding +if console_encoding == None: + if __sys.platform=='win32': + console_encoding = 'cp850' + else: + console_encoding = 'iso-8859-1' + +# Save base_dir for use by other modules +base_dir = _base_dir + +def makepath(path): + """Return a normalized absolute version of the path argument. + + - if the given path already exists in the filesystem + the filesystem is not modified. + + - otherwise makepath creates directories along the given path + using the dirname() of the path. You may append + a '/' to the path if you want it to be a directory path. + + from holger@trillke.net 2002/03/18 + + """ + from os import makedirs + from os.path import normpath, dirname, exists, abspath + + dpath = normpath(dirname(path)) + if not exists(dpath): makedirs(dpath) + return normpath(abspath(path)) + +def datafilepath(*filename): + """Return an absolute path to a data file in a standard location. + + Argument(s) are zero or more directory names, optionally followed by a + data file name. The return path is offset to config.base_dir. Any + directories in the path that do not already exist are created. + + """ + import os + return makepath(os.path.join(base_dir, *filename)) + +def shortpath(path): + """Return a file path relative to config.base_dir.""" + import os + if path.startswith(base_dir): + return path[len(base_dir) + len(os.path.sep) : ] + return path + +# +# When called as main program, list all configuration variables +# +if __name__=="__main__": + import types + _all=1 + for _arg in __sys.argv[1:]: + if _arg=="modified": + _all=0 + else: + print "Unknown arg %s ignored"%_arg + _k=globals().keys() + _k.sort() + for _name in _k: + if _name[0]!='_': + if not type(globals()[_name]) in [types.FunctionType, types.ModuleType]: + if _all or _glv[_name]!=globals()[_name]: + print _name,"=",repr(globals()[_name]) + +# cleanup all locally-defined variables + +for __var in globals().keys(): + if __var.startswith("_") and not __var.startswith("__"): + del __sys.modules[__name__].__dict__[__var] + +del __var, __sys +del os, re +